Home | Products | Modules | 2.4Ghz Transceiver Modules (2 Pack)

2.4Ghz Transceiver Modules (2 Pack)

£3.49

Self-Contained 2.4Ghz Transceiver Modules (2 off).

Out of stock

SKU: MOD-NRF24L01-01-2X Category:

Product Description

These tiny radio units use the world standard 2.4GHz ISM band for transmitting/receiving serial data. The units contains all of the necessary packet handling and addressing protocols using the ShockBurst data layer, simplifying micro-controller software. No external antenna is required due to the inbuilt antenna etched onto the PCB.

A maximum data speed of 2Mps can be achieved in ideal conditions and the maximum communication distance is over 200 feet in the open air.

PINNAMEDESCRIPTION
1GNDGround
2VCC1V9 to 3V6
3CEInput – Module Enable
4CSNInput – SPI Chip Select (Active Low)
5SCKInput – SPI Clock
6MOSIInput – SPI Data In
7MISOOutput – SPI Data Out
8IRQOutput – Interrupt (Active Low)

 

Size: 15.5(w) x 29(l) x 13(h)mm.
Operating Voltage: 1V9 to 3V6.
Interface: SPI (5V tolerant).
Tx/Rx Speed: 250kbps, 1Mbps and 2Mbps
Radio Frequency: 2.4Ghz
Antenna: On-Board

DIYEmbeddedEmbedded Projects Blog with nRF24L01 Tutorials.
ArduinoInfoHow-To Guide – Using nRF24L01’s with Arduino Boards.
This site uses cookies. Click for more information.